Hire.

The all new LED Pro PAR 64 takes giant steps forward in its use of technology to ensure the highest quality of output.

We all knew that LED products would eventually become as bright as traditional fittings, its seems that has all happened sooner than we thought.

First off the 20 x 3 Watt LED's are using "tri-colour" technology, meaning that each LED contains a red, green and blue chip; colour is mixed before it leaves the fitting, creating highly saturated colours free of chromatic shadowing that is evident on standard RGB units.

Further to that the LED software that controls the dimming has high refresh rates ensuring that the output will not flicker on screens in television applications.

The all new cable entry ensures that all cables are kept clear if hanging from truss and nice and neat if floor mounting on its double yoke system.

Finally, an LCD display on the rear of the unit is the interface for DMX selection and stand-alone control.

·         20 x 3w "3-In-1" LED's

·         Full range dimming levels of Red, Green and Blue within LED's for full colour mixing

·         3w "3-In-1" LED's allow for colour mixing without normal chromatic shadowing, Silent, fanless technology, Double yoke for floor standing, Flicker free operation

·         DMX, Auto Mode, Audio, Static Colour Selection via digital LCD menu system

·         5 Pin

·         7 Channels

·         25° Optics

·         225 x 225 x 325mm

·         3.4kg